2004 Toyota Sienna - Axle Pinion Race

Showing Results Recommended For Your: 

2004 Toyota Sienna

1 - 11 of 11 results for Axle Pinion Race

Precision M/T Pinion Race - HM88610

Part #:
HM88610
Line:
PRB
11.99 Each
Availability Controls for Precision M/T Pinion Race
Differential Pinion Race   Rear Inner
Outer Race/Cup Width (in):   0.781 Inch
Outer Race/Cup Width (mm):   20mm
Outer Race/Cup Outside Diameter (in):   2.844 Inch

MasterPro Multi-Purpose Bearing Race - HM88610

Part #:
HM88610
Line:
MPB
6.99 Each
Availability Controls for MasterPro Multi-Purpose Bearing Race
Differential Pinion Race   Rear Inner; 6.7 Inch Ring Gear; Toyota Axle
Outer Race/Cup Outside Diameter (mm):   72mm
Inner Race/Cup Inside Diameter (in):   2.840 Inch
Inner Race/Cup Inside Diameter (mm):   72mm

MasterPro Wheel Bearing Race - M86610

Part #:
M86610
Line:
MPB
4.99 Each
Availability Controls for MasterPro Wheel Bearing Race
Differential Pinion Race   Rear Outer; 6.7 Inch Ring Gear; Toyota Axle
Outer Race/Cup Outside Diameter (mm):   64.29mm
Inner Race/Cup Inside Diameter (in):   2.530 Inch
Inner Race/Cup Inside Diameter (mm):   64.29mm

MasterPro Bearing/Seal Wheel Bearing And Race Set - A35

Part #:
A35
Line:
MPB
26.99 Each
Availability Controls for MasterPro Bearing/Seal Wheel Bearing And Race Set
Axle Differential Bearing   Rear; 6.7 Inch Ring Gear; Toyota Axle; Taper Bearing Set Includes Cup And Cone
Bearing Type:   Tapered
Inner Race/Cup Width (in):   0.770 Inch
Inner Race/Cup Width (mm):   19.56mm

Corteco Multi-Purpose Seal - 49442396

Part #:
49442396
Line:
CCO
8.99 Each
Availability Controls for Corteco Multi-Purpose Seal
Differential Seal   Rear; All Wheel Drive; OE Number: 90311-35032

Precision A/T Pinion Bearing - M86649

Part #:
M86649
Line:
PRB
14.99 Each
Availability Controls for Precision A/T Pinion Bearing
Multiple Applications
Bearing Type:   Tapered
Bearing/Cone Inside Diameter (in):   1.188 Inch
Bearing/Cone Inside Diameter (mm):   30.163mm

What is a Pinion Bearing and Race?


The pinion is the drive gear located in your vehicle's differential which receives power from the driveshaft. The pinion then rotates and turns the ring gear, which engages and powers the axle shafts. The pinion rides on the pinion bearing and race which allows it to rotate freely with minimal friction or interference. The pinion bearing is usually a roller-style bearing, and the race is the smooth machined contact surface which allows the bearing to rotate and move freely. These parts are imperative to the operation of the differential, as any friction or resistance in the bearing can cause the pinion shaft to bind and lead to ring or pinion gear damage, U-joint wear and failure, and other issues. Age and low gear oil levels in the differential or axle assembly can lead to friction that may damage the bearing and race. When the bearing or race are damaged, the pinion may not roll smoothly, and this can cause a whirring noise when speeding up or slowing down, looseness or play in the differential gears, and could eventually lead to more severe damage. If you notice noises from your axle, differential, or driveshaft, check the condition of your bearings and U-joints as well as the fluid level in the differential housing. If any of these parts need to be replaced, or if you need to change the differential gear oil, you can find all the parts and supplies you need at O'Reilly Auto Parts. We carry replacement pinion bearings, U-joints, or other differential parts to help you restore your vehicle's performance and driveability.