Gates Xtreme 440 Foot Hydraulic Hose - 70095
- Part #
- 70095
- Line:
- GAT
Product Information
- Warranty: 1 Year Limited Warranty
- Unit of Measure: Roll of 440
- UPC: # 770075682325
- Length (ft): 440 Foot
- Material: Chlorinated Polyethylene Rubber (CPE)
- Minimum Bend Radius (in): 3-3/8 Inch
- Hose Inside Diameter (in): 3/16 Inch
- Temperature Range (Deg F): -40 To 302 Degree
- Hose Inside Diameter (mm): 5mm
- Maximum Working Pressure (psi): 3000 psi
- Hose Outside Diameter (in): 1/2 Inch
- Minimum Burst Pressure (psi): 12000 psi
- Cover Color: Blue
- Continuous Operating Temperature Range (Deg F): -40 To 302 Degree
- Cover Material: Polyester
- Cover Type: Mildew, Oil Resistant
- Hose Outside Diameter (mm): 13mm
- Reinforcement Style: Braided, High Tensile Wire
Applications for this Product
- This product is universal and applies to all vehicles.
Detailed Description
Hydraulic Hose; C5CXH Xtreme Heat Hose; SAE 100R5;
C5C-XH Xtreme Heat Hose is recommended for extremely high-temperature lube oil lines for on-highway truck and bus, off-road construction and agricultural vehicles. Also, for high temperature petroleum based or phosphate ester fluids, turbocharger oil supply and hot lube oil lines
- For use with C5 and C5X Field Attachable Couplings [G34 Series], and crimp options for MegaCrimp [G25 Series] and GlobalSpiral [G20 Series], depending on size
- Blue, oil and mildew resistant polyester/textile braid cover
- Meets the requirements of SAE 100R5 for hydraulic applications
- DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for (-4 to -12)
- Temperature Range: -40 Degree Fahrenheit to +302 Degree Fahrenheit (-40 Degree Celsius to +150 Deg. C)
- NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings
- NOTE: See Engineering and Technical Data Section of the Gates Hydraulic Catalog for compliance.
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed. These strong relationships together with Gates commitment to continuous innovation enable us to offer a complete line of OE quality products for the Aftermarket. From Timing Belts to Micro-V AT Belts, Tensioners and Hose, for both import and domestic vehicles, install with confidence, install Gates.