Melling Select Oil Pump - 10342
- Part #
- 10342
- Line:
- MEL
Product Information
- Warranty: No warranty after installation
- Unit of Measure: Each
- UPC: # 729295513360
- Finish: Anodized Hardcoat
- Type: High Performance Upgrade
- Height (in): 5.500 Inch
- Height (mm): 139mm
- Width (in): 7.250 Inch
- Width (mm): 154mm
- Hardware Included: No
- New Or Remanufactured: New
- Bolts Included: No
- O-Ring Included: Yes
- Drive Style: Crankshaft
- Washers Included: No
- Mounting Hole Diameter (in): 0.380 Inch
- Housing Material: Aluminum
- Bushing Included: No
- Number Of Mounting Holes: 4
- Gasket Or Seal Included: Yes
- Spacer Included: No
- Cotter Pin Included: No
- Springs Included: Yes
- High Volume: No
- Governor Spinner Included: No
- Intermediate Shaft Included: No
- Pump Cover Included: Yes
- Gears Included: Yes
- Cover Material: Cast Aluminum
- Guide Included: No
- Pump Pressure: 15 Percent Above Standard
- Nylon Bushing Included: No
- Pickup Screen Included: No
- Rotor Material: Powdered Metal
- Timing Cover Included: No
- Pump Volume: Standard
- Mounting Hole Diameter (mm): 10mm
- High Pressure: Yes
- Pick Up Tube Diameter (in): 1.125 Inch
- Pick Up Tube Diameter (mm): 29mm
Applications for this Product
- Select a vehicle to see vehicle applications.
Detailed Description
Oil Pump; High Performance;
Made in USA. Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling 10342 high performance oil pump is a standard volume upgrade of the M342. The 10342 features an anodized hard coated aluminum body and cast iron phosphate coated cover for improved pump performance and durability. Adjustable by pass pressure using optional springs. The relief valve has a pressure adjustable screw in plug instead of a cup plug. The oil pump screen mounting seal is included. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions
- Standard volume high pressure performance upgrade of the M342
- Hardcoat anodized body with cast iron phosphate coated cover from improved pump performance and durability
- Adjustable by-pass pressure using optional +10 psi and +15 psi springs
- The cup plugs have been replaced with threaded fittings
- Uses a 1-1/8 inch bolt on screen.
Brand Information
From Melling's first M-10 oil pump built with remarkable care and detail for a 1937 six cylinder Chevrolet - Melling's business has steadily expanded. In 1948 Melling issued its first catalog containing 14 part numbers. Today Melling offers over 350 oil pumps, 80 repair kits and 170 oil pump screens along with an expanded internal engine parts line. From setting the bar for cutting edge oil pump technology with high volume and high pressure oil pumps to being the first nationally recognized aftermarket supplier of new replacement camshafts Melling's reputation continues to grow.