RPM Series

Edelbrock RPM Series Camshaft - 2219

Part #
2219
Line:
EDB

Product Information

  • Warranty:  Manufacturer's Defect Warranty
  • Unit of Measure:  Each
  • UPC:  # 85347022199
  • Exhaust Advertised Duration (Deg): 308 Degree
  • Exhaust Duration At 0.050 Inch Lift (Deg): 243 Degree
  • Exhaust Valve Lift With OE Rocker Arm Ratio (in): 0.631 Inch
  • Intake Advertised Duration (Deg): 291 Degree
  • Intake Duration At 0.050 Inch Lift (Deg): 230 Degree
  • Intake Valve Lift With OE Rocker Arm Ratio (in): 0.631 Inch
  • Lobe Separation Angle (Deg): 114 Degree
  • Idle Vacuum At 1000 RPM (in): 14 Inch
  • Intake Lobe Center (Deg): 113 Degree
  • Intake Valve Lift (in): 0.371 Inch
  • Computer Controlled Compatible: Yes
  • Lifter Type: Hydraulic Roller
  • Exhaust Valve Lift (in): 0.371 Inch
  • Engine Make/Size: Chevrolet Small Block LS1
  • Camshaft Type: Hydraulic Roller

Applications for this Product

  • This product is universal and applies to all vehicles.

Detailed Description

Camshaft;

Edelbrock Rollin' Thunder Camshaft number 2219 is designed for LS1/LS6 Gen III Chevrolet's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4X4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 536HP and 457 foot/Lbs. of Torque when paired with E-CNC 215 number 79949 cylinder heads. Must use a high stall torque converter only. Will not work with stock valve springs. Camshaft Specifications: Intake duration: 230 Degrees- Exhaust duration: 243 Degrees- Intake lift: 0.631 inch- Exhaust lift: 0.631 inch- Lobe separation: 114 Degree- Intake Center Line: 113 Degree- Vacuum: 14 inch Designed for 1500 to 6500 RPM Performance. Extensive Dyno And Real World Tested. Matched to Edelbrock Performer RPM Intakes. 10 To 12 inch Of Manifold Vacuum At Idle. More Lift And Duration Than Most Street Camshafts. Dyno-Matched/Street-Proven Performance. Take the Guesswork Out of Camshaft Selection!. Use with High Stall Torque Converter Only.

Brand Information

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive and motorcycle aftermarkets. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses six locations in Southern California totaling more than 500,000 square feet.
Show All Details Show Less Details