RPM Series

Edelbrock RPM Series Camshaft - 2207

Part #
2207
Line:
EDB

Product Information

  • Warranty:  Manufacturer's Defect Warranty
  • Unit of Measure:  Each
  • UPC:  # 85347022076
  • Exhaust Advertised Duration (Deg): 314 Degree
  • Exhaust Duration At 0.050 Inch Lift (Deg): 240 Degree
  • Exhaust Valve Lift With OE Rocker Arm Ratio (in): 0.594 Inch
  • Intake Advertised Duration (Deg): 305 Degree
  • Intake Duration At 0.050 Inch Lift (Deg): 305 Degree
  • Intake Valve Lift With OE Rocker Arm Ratio (in): 0.594 Inch
  • Lobe Separation Angle (Deg): 112 Degree
  • Idle Vacuum At 1000 RPM (in): 11 Inch
  • Range (RPM): 1500 To 6500 RPM
  • Intake Lobe Center (Deg): 107 Degree
  • Intake Valve Lift (in): 0.396 Inch
  • Computer Controlled Compatible: No
  • Lifter Type: Hydraulic Roller
  • Exhaust Valve Lift (in): 0.396 Inch
  • Engine Make/Size: Chevrolet Small Block 262-400
  • Camshaft Type: Hydraulic Roller

Applications for this Product

  • This product is universal and applies to all vehicles.

Detailed Description

Camshaft;

Edelbrock Rollin' Thunder Camshaft number 2207 is designed for 283-400 V8 Chevrolet engines from 1987-Later and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4X4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This camshaft produced 460HP and 460 foot/Lbs. of Torque when paired with Performer RPM Air-Gap intake manifold number 7516, Thunder Series AVS carburetor number 1813 and Performer RPM E-Tec cylinder heads number 60985 on a 383 CID Small Block Chevrolet engine. Use with a high stall torque converter and stock ratio rocker arms only. Camshaft Specifications: Intake duration: 242 Degrees- Exhaust duration: 240 Degrees- Intake lift: 0.594 inch- Exhaust lift: 0.594 inch- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 11 inch Designed for 1500 to 6500 RPM Performance. Extensive Dyno And Real World Tested. Matched to Edelbrock Performer RPM Intakes. 10 To 12 inch Of Manifold Vacuum At Idle. More Lift And Duration Than Most Street Camshafts. Dyno-Matched/Street-Proven Performance. Take the Guesswork Out of Camshaft Selection!. Use Only Stock Ratio Rocker Arms.

Brand Information

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive and motorcycle aftermarkets. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses six locations in Southern California totaling more than 500,000 square feet.
Show All Details Show Less Details