Rollin Thunder

Edelbrock Rollin Thunder Camshaft - 2281

Part #
2281
Line:
EDB

Product Information

  • Warranty:  Manufacturer's Defect Warranty
  • Unit of Measure:  Each
  • UPC:  # 85347022816
  • Exhaust Advertised Duration (Deg): 302 Degree
  • Exhaust Duration At 0.050 Inch Lift (Deg): 238 Degree
  • Exhaust Valve Lift With OE Rocker Arm Ratio (in): 0.582 Inch
  • Intake Advertised Duration (Deg): 299 Degree
  • Intake Duration At 0.050 Inch Lift (Deg): 238 Degree
  • Intake Valve Lift With OE Rocker Arm Ratio (in): 0.573 Inch
  • Lobe Separation Angle (Deg): 112 Degree
  • Range (RPM): 1500 To 6500 RPM
  • Intake Lobe Center (Deg): 107 Degree
  • Intake Valve Lift (in): 0.364 Inch
  • Lifter Type: Hydraulic
  • Exhaust Valve Lift (in): 0.364 Inch
  • Engine Make/Size: Ford 351 Windsor
  • Camshaft Type: Roller

Applications for this Product

  • Select a vehicle to see vehicle applications.

Detailed Description

Camshaft;

Edelbrock Rollin' Thunder Camshaft number 2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4X4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 449HP and 413 foot/Lbs. of Torque when paired with RPM Air-Gap Dual Quad intake manifold number 75354 and Performer RPM cylinder heads number 60255. Must use a high stall torque converter. Will not work with stock valve springs. Camshaft Specifications: Intake duration: 235 Degrees- Exhaust duration: 238 Degrees- Intake lift: 0.573 inch- Exhaust lift: 0.582 inch- Lobe separation: 112 Degree- Intake Center Line: 107- Vacuum: 10 inch Designed for 1500 to 6500 RPM Performance. Extensive Dyno And Real World Tested. Matched to Edelbrock Performer RPM Intakes. 10 To 12 inch Of Manifold Vacuum At Idle. More Lift And Duration Than Most Street Camshafts. Dyno-Matched/Street-Proven Performance. Take the Guesswork Out of Camshaft Selection!. Use Only Stock Ratio Rocker Arms.

Brand Information

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive and motorcycle aftermarkets. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses six locations in Southern California totaling more than 500,000 square feet.
Show All Details Show Less Details