Rollin Thunder

Edelbrock Rollin Thunder Camshaft - 2209

Part #
2209
Line:
EDB

Product Information

  • Warranty:  Manufacturer's Defect Warranty
  • Unit of Measure:  Each
  • UPC:  # 85347022090
  • Exhaust Advertised Duration (Deg): 290 Degree
  • Exhaust Duration At 0.050 Inch Lift (Deg): 222 Degree
  • Exhaust Valve Lift With OE Rocker Arm Ratio (in): 0.479 Inch
  • Intake Advertised Duration (Deg): 280 Degree
  • Intake Duration At 0.050 Inch Lift (Deg): 212 Degree
  • Intake Valve Lift With OE Rocker Arm Ratio (in): 0.462 Inch
  • Lobe Separation Angle (Deg): 112 Degree
  • Range (RPM): 1500 To 5500 RPM
  • Intake Lobe Center (Deg): 107 Degree
  • Intake Valve Lift (in): 0.462 Inch
  • Lifter Type: Hydraulic
  • Exhaust Valve Lift (in): 0.479 Inch
  • Engine Make/Size: Chevrolet Small Block 262-400
  • Camshaft Type: Roller

Applications for this Product

  • Select a vehicle to see vehicle applications.

Detailed Description

Camshaft;

Edelbrock Rollin' Thunder Camshaft number 2209 is designed for 265-350 Chevrolet V8 engines from 1987-Later and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4X4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 408HP and 450 foot/Lbs. or Torque when paired with Pro-Flo XT EFI system number 3528 and Performer RPM E-Tec cylinder heads number 60975 on a 383 CID engine using stock hydraulic roller lifters and pushrods. Camshaft Specifications: Intake duration: 212 Degrees- Exhaust duration: 222 Degrees- Intake lift: 0.462 inch- Exhaust lift: 0.479 inch- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 16 inch Feature More Aggressive Profiles. Maximum Power in High-RPM with Good Low-End Torque. Reduce Friction. Virtually Eliminate Break-In Problems. Dyno-Tested. 1987 And Later Engines Originally Equip. with Roller Cam. Uses Stock Pushrods.

Brand Information

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive and motorcycle aftermarkets. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses six locations in Southern California totaling more than 500,000 square feet.
Show All Details Show Less Details