Gates MegaTech 350 Foot Hydraulic Hose - 70851
- Part #
- 70851
- Line:
- GAT
Product Information
- Warranty: 1 Year Limited Warranty
- Unit of Measure: Per Roll
- UPC: # 72053942422
- Length (ft): 350 Foot
- Material: Chlorinated Polyethylene Rubber (CPE)
- Minimum Bend Radius (in): 2-1/2 Inch
- Vacuum Rating (in/Hg): 30 Inch/Hg
- Hose Inside Diameter (in): 3/8 Inch
- Temperature Range (Deg F): -40 To 300 (Petroleum-Base Fluid), -40 To 212 Degree (Phosphate Ester Fluids)
- Hose Inside Diameter (mm): 9mm
- Maximum Working Pressure (psi): 1000 psi
- Hose Outside Diameter (in): 11/16 Inch
- Minimum Burst Pressure (psi): 4000 psi
- Cover Color: Black
- Continuous Operating Temperature Range (Deg F): -40 To 300 Degree
- Cover Material: Synthetic Rubber
- Cover Type: Mildew, Oil Resistant
- Hose Outside Diameter (mm): 17mm
Applications for this Product
- This product is universal and applies to all vehicles.
Detailed Description
Hydraulic Hose; MegaTech 1000 High-Temp Oil-Air Return Hose;
MegaTech 1000 High-Temp hose is recommended for air brake hose, pressurized hot oil return lines and rotary oil/air compressor lines. Not recommended for gasoline or diesel fuel applications
- For use with MegaCrimp Couplings [G25 Series]
- 1000 psi constant pressure for all ID's
- Meets the requirements of DOT FMVSS 106-74, SAE J1402, for air brake hose (-4, -6, -8, -10)
- Temperature Range: Petroleum-based Fluids: -40 Degree Fahrenheit to +300 Degree Fahrenheit (-40 Degree Celsius to +149 Deg. C)
- Phosphate Esters Fluids as recommended by the fluid manufacturer, but within a range of -40 Degree Fahrenheit to +212 Degree Fahrenheit (-40 Deg. C to +100 Deg. C)
- NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings
- NOTE: See Engineering and Technical Data Section of the Gates Hydraulic Catalog for compliance
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed. These strong relationships together with Gates commitment to continuous innovation enable us to offer a complete line of OE quality products for the Aftermarket. From Timing Belts to Micro-V AT Belts, Tensioners and Hose, for both import and domestic vehicles, install with confidence, install Gates.