MAHLE Service Solutions Transmission Automatic Transmission Fluid Exchanger - 4008000900

Automatic Transmission Fluid Exchanger; Features ADAPTABLE Dipstick or Cooler mode selector, start engine indicator. ELECTRONIC DIODE ILLUMINATED KEYPAD Fluid flow direction indicator verifies correct hookup. TRANSMISSION DIAGNOSTIC PRESSURE GAUGE For a more effective exchange process. NEW & USED FLUID SIGHT GLASSES Improve service accuracy. AUTOMATIC FLUID LEVEL ADJUSTMENT +/- 1/2 quarts. DIGITAL WEIGHT SCALE Technology for accurate fluid exchange. PATENTED BYPASS CIRCUIT Increased safety for vehicle protection. FAST Full exchange service times of 2 to 5 minutes & 8 to 14 minutes in Dipstick mode. Specifications Adapters Cooler line connection. Valved couplers for minimum spill. Standard adapters for Ford, GM, Chrysler, & Universal (most Asian). Controls Microprocessor with digital keypad & light emitting diode. Dimensions (H x W x D) 45 in x 28 in x 26.5 in (112 cm x 70 cm x 67 cm). Fluid Tanks / Types 26 quarts (24.6 liters) each for both new & used fluids / Multiple fluid capability. Hoses 10 ft (3 m) black & red (exchange); 8 ft (2.5 m) black (empty used tank), ATX-3+Boost also includes 5 ft (1.5 m) clear, attached to 8 ft (2.5 m) lack hose for dipstick mode. New Fluid Pump Positive displacement gear pump, 4 quarts (3.8 liters) per minute/includes diaphragm pump, 7.2 quarts (6.84 liters) per min. Diaphragm pump increases fluid suction rate in low-flow/temperature controlled transmission in both ATX-2+Boost & ATX-3+Boost units. Operating Range Cooler Mode: 32 to 122 degrees Fahrenheit (0 to 50 degrees Celsius) Dipstick Mode: 42 to 122 degrees Fahrenheit (5.5 to 50 degrees Celsius). Power Source 12 VDC - 10 Amp. Process Time 3 to 6 minutes average full exchange. Dipstick Mode is available on the ATX-3+Boost with 8 to 14 minutes average full exchange. Scale Accuracy +/- 0.03% over usable range"