Gates Coolant Hose - 20121
- Part #
- 20121
- Line:
- GAT
Product Information
- Warranty: 1 Year Limited Warranty
- Unit of Measure: Each
- UPC: # 72053050653
- Centerline Length (in): 17-7/8 Inch
- Centerline Length (mm): 455mm
- Material: EPDM Rubber
- Number Of Branches: 0
- Molded: Yes
- Number Of Quick Connect Fittings: 0
- End 1 Inside Diameter (in): 1-1/2 Inch
- End 2 Inside Diameter (in): 1-1/2 Inch
- End 1 Inside Diameter (mm): 38mm
- End 2 Inside Diameter (mm): 38mm
Applications for this Product
- Select a vehicle to see vehicle applications.
Detailed Description
Coolant Hose; Molded;
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Degree Fahrenheit to +257 Degree Fahrenheit (-40 Degree Celsius to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications. Similar to OEM specifications. Has all the quality features of Gates Molded Coolant Hose. Engineered to resist electrochemical degradation - the leading cause of hose failure. Meets SAE 20R3 type EC Class D-1 and D-2 specifications. Temperature rating: -40 degree F to 275 degree F (-40 degree C to 135 degree C) in coolant hose applications.
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed. These strong relationships together with Gates commitment to continuous innovation enable us to offer a complete line of OE quality products for the Aftermarket. From Timing Belts to Micro-V AT Belts, Tensioners and Hose, for both import and domestic vehicles, install with confidence, install Gates.