Edelbrock E-Force Supercharger Kit - 15388
- Part #
- 15388
- Line:
- EDB
Product Information
- Warranty: 3 Year Limited Warranty
- Unit of Measure: Each
- UPC: # 85347153886
- Finish: Powder Coat
- Material: Cast Aluminum
- Hardware Included: Yes
- System Type: Stage 2 - Street/Strip System
- Bracket Included: Yes
- Hose Included: Yes
- Gasket Or Seal Included: Yes
- Fuel Pump Included: Yes
- Air Filter Included: Yes
- Spark Plugs Included: Yes
- Maximum Boost (psi): 16.3 psi
- Blower - Drive Pulley Diameter (in): 3-1/2 Inch
Applications for this Product
- Select a vehicle to see vehicle applications.
Detailed Description
Edelbrock's highest horsepower, supercharger system is now available for owners of late-model Ford Mustangs with the 5.0L engine. The new Edelbrock Stage II Supercharger number 15388 for the 2018 to 2020 Mustang is a complete kit that takes full advantage of the improved Gen 3 DI/PI Coyote engine. At the heart of this system is the highly efficient R2650 TVS rotor assembly with an integrated high-capacity DP3C (dual-pass, three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. New 170-degree high-twist lobes, bigger bearings and beefier timing gears ensure unparalleled reliability with smooth acceleration throughout the power band. To support the additional Stage II power increase, the fuel system components are upgraded to include larger 50 Lbs./Hour direct-port fuel injectors along with a Fuel Pump Voltage Booster. A dramatic increase in airflow over the Stage I kit comes from a new 103mm billet aluminum throttle body (23mm larger than Stage I) and high-flow air intake system with 113mm MAF housing. Edelbrock's 8-Rib Drive Belt upgrade minimizes slippage to maintain consistent boost pressure under full throttle. Each supercharger comes finished with a durable black powder-coating that blends nicely into the Mustang engine compartment and includes a preformed hose kit, hardware and a full-color step-by-step instruction manual to streamline the installation process. This is a true bolt-on that installs cleanly with no modifications to the hood or body. This potent Stage II system for the new Mustang is 50-state emissions legal. E-Force Stage II Supercharger Kit.
The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. Edelbrock's inverted supercharger assembly is uniquely oriented, allowing for an incredible amount of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential. E-Force superchargers feature the most unique & efficient inlet configuration on the market. This results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly & matching aluminum coil covers (on applicable systems) are black powdered coated for durability with highlighted fins & Edelbrock logo for a unique appearance that will give any engine compartment a custom look.