Design Engineering

Design Engineering Heat Shield - 10517

Part #
10517
Line:
DES

Product Information

  • Warranty:  Limited Lifetime Warranty
  • Unit of Measure:  Each
  • UPC:  # 607078105172
  • Color: Silver
  • Length (in): 48 Inch
  • Width (in): 21 Inch
  • Heat Rating-Direct (Deg F): 1400 Degree

Applications for this Product

  • This product is universal and applies to all vehicles.

Detailed Description

Heat Shield; Non-Adhesive; 21 Inch X 48 Inch;

Form-A-Shield(TM) solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector

  • Can Be Applied Directly To Hot Surfaces
  • Ideal For Firewalls/Exhaust Manifolds Transmission Tunnels
  • Superior Insulator Anywhere Near The Path Of Exhaust Pipes
  • Withstands Direct Heat Up To 1400 Degrees F
  • Constructed From 10 Mil Aluminum Bonded To 1/4 Inch Basalt Mat
  • Extremely Pliable And Forms To Many Shapes And Configurations
  • No Adhesive Backing
  • Fasten With Straps/Clamps Or DEI Locking Ties
  • Durable And Resistant To Oil And Chemical Spills
  • 21 Inch x 48 Inch Shield

Brand Information

Founded in 1995, Design Engineering, Inc. is fast becoming the leader in heat protective technology for the Performance Racing Industry. In the past few years, Design Engineering, Inc. has gone from 16 part numbers to well in excess of 125 in heat, protection, and performance enhancing products. It is through dedication and commitment to quality that we have catapulted to the leader of the pack.

In any form of motorsports, the name of the game is competition. This competitive nature is fueled by horsepower-and lots of it. Just as the old saying goes, "Where there is smoke, there is fire" the same holds true for horsepower and heat. They bear this in mind when designing each and every thermal-protective product they create. As enthusiasts, we know all too well, the devastation that heat can cause to valued components, let alone, the degradation of efficiency and the discomfort to you - the person that pilots the "hell-on-wheels" down the track or course.

They dedicate all their efforts to combating heat with - what they believe to be - the finest heat protective products on the market today. Whether you are involved with Street Rods, Street Machines, Domestic/Import Drag Racing, Circle Track, or any form of motorsport competition, they manufacture what it takes to protect your investment. They pledge to uphold their level of commitment and quality by offering outstanding products to improve horsepower, efficiency and longevity for your car, boat, or motorcycle.
Show All Details Show Less Details