ARB

ARB Auxiliary Light - 1780520

Part #
1780520
Line:
AAC

Product Information

Applications for this Product

  • This product is universal and applies to all vehicles.

Detailed Description

Auxiliary Light;

The ARB Auxiliary Light includes a unique ARB BASE Rack bracket, over molded DT connector suitable for BASE Rack channeling, an additional DT connector for custom wiring, and a scene lighting beam to reduce hot spots in beam output and reduce glare for reverse cameras. The unique ARB BASE Rack bracket provides the ability for installation to any part of the BASE Rack's dovetail system. It can be wired to provide additional aux lighting around the vehicle for camping, working, or reverse lighting. Being compact at 2.8 X 2.21 inches, it allows for mounting in close fitting areas and along the edge of the BASE Rack to minimize damage on tight roads and close parking. Its compact size further provides a sleek look and allows for a stealthy configuration. The two 10 Watts OSRAM LEDs (20 Watts total) provide intense lighting that spreads over a larger area than standard auxiliary lights, making the beam a true area light and minimizing hot spots from focused beams. Reduction of hot spots translates to clear images being sent through your reverse camera system when used at night or in dim environments as well as clear, not glaring lighting around the camp or worksite. Included with the ARB BASE Rack Auxiliary Light is 1 X 20 Watts LED Light, 1 X Bracket to suit the ARB BASE Rack or Classic Racks, and both Male and Female DT connectors.

  • Easily install on any part of the BASE Rack's dovetail mounting system
  • Scene lighting beam to reduce hot spots in beam output and reduce glare for reverse cameras
  • Compact design allows for mounting in close fitting areas and along the edge of the rack to minimize damage on tight roads
  • Sleek, minimal design results in a stealthy configuration
  • BASE Rack brackets and DT connectors included
  • 9v to 36v input
  • 20 Watts power consumption/1.5A
  • 1,100 Lumens at 5700K

Brand Information

Today, we supply and manufacture a complete selection of the most highly regarded 4WD accessories in the world. Unlike many 4x4 equipment suppliers that simply stock a collection of parts with a low cost, 'one size fits all' mentality, ARB thoroughly researches and tests each product before releasing it to the 4x4 public. We consider many factors during this analysis, including specific vehicle characteristics, the conditions the product will work in, and the overall quality of the product itself. Take suspension systems for example. Many aftermarket 4x4 suspension kits ignore the obvious differences between varying vehicle suspension set-ups and driver requirements, offering instead an increased ride height and little else. ARB's Old Man Emu suspension division employs a very different approach. Typically our OME engineers will purchase the vehicle in question, test it in a variety of conditions to determine if and where improvements can be made, then develop a line of finely tuned, totally integrated suspension systems, each offering varying degrees of comfort, load carrying capability and control characteristics. When combined with our state-of-the-art manufacturing plants and a highly skilled workforce, this attention to detail is what sets ARB 4x4 equipment apart. So whether you're new to 4WDing and putting your first truck to the test, or a 4x4 veteran getting set for your next off road adventure, you can rely on ARB 4x4 Accessories... we won't let you down.
Show All Details Show Less Details